German sniper rifle DSR-1
History creating a sniper rifle "DSR-1"
At the very end of the last millennium, the company "DSR-Precision GmbH" developed from scratch and launched a sniper rifle to provide anti-terrorist actions. For about five years, the rifle was sold on the European market under the name AMP Technical Services DSR-1. Due to the fact that the rifle was not intended for military units, the focus was on achieving high accuracy with small compact sizes. And such characteristics as durability and reliability faded into the background, due to the use of a rifle in combat single operations of the police forces.
The Defensive Sniper Rifle 1 sniper rifle was specially designed for the .338 “Magnum” cartridge, but it was possible to redesign the rifle for firing the .300 and .308 rifle cartridges. Weapon made according to the “bullpup” layout, when the locking assembly and the magazine are located behind the control handle.
The barrel of the rifle has a free location, and is made with the longitudinal lobes, equipped with a two-chamber muzzle brake. To increase the range and accuracy over long distances, the muzzle brake is disconnected and fired without it.
The locking protrusion and a special notch fix the barrel with the breech and the receiver, and fasten it with several screws to the receiver.
Also, the barrel has protection against overheating in the form of a tubular casing with small uniform holes.
Using a sliding bolt with six protrusions, and turning it, before the protrusions enter the slots located on the breech, we perform a solid closure of the barrel bore. The shutter has a shortened design, and is supplemented with a shortened handle. This type of coupling of the barrel and bolt allowed the developers to perform a lightweight receiver. It is made of aluminum alloys and at the top is equipped with a strap for fitting the aiming device. The sight to the rifle is selected from the “12x56” series, it is possible to mount the NSV-80 night sight in front of the usual sight, to use the rifle in night operations.
At the end of the receiver fixed application unit. Butt has the ability to adjust the length to 50 mm. The shoulder support with vertical shock absorber is adjustable to 50 mm. Head lining is height adjustable up to 20 mm.
The butt has a recess, which creates a convenient handle under the left hand - a specially designed supplement for firing from the stop, for which the rifle itself is intended.
The special back support located inside the butt, the height of the support 17cm, complements the fixation for aiming.
Clicking on the trigger occurs with a warning, and according to the results of testing and use, ensures a smooth pressing, in which the tip remains at a given point and is not reset. It is secured by the trigger bearing bearing.
The safety lever is designed above the trigger mechanism, the middle position is the trigger lock, at which the rifle can be loaded, the back position is the complete lock of both the trigger mechanism and the shutter. Front position - unlocking rifle for firing.
On the bar for mounting the telescopic sight, set the sliding fry with legs. The legs have an adjustable design. In non-fighting position, the bipod is folded parallel to the bar.
To shoot from the arm or with support on the additional support, the forearm can be attached to the barrel and have 3 fixed positions.
The single-row rifle magazine holds four .338 cartridges or five .308 and .300 cartridges. The shop is fixed by side-position latches.
To facilitate the replacement of the store, it has an enlarged cover, which can also be used to support the arm.
A spare magazine is attached a little ahead of the trigger mechanism, which ensures instant replacement, and the store suffers less from external influence.
The “DSR-1” rifle when shooting at one hundred meters shows very good results - the deviation does not exceed half a centimeter, the dispersion diameter is at this distance 1.5 centimeter.
Sniper rifle modifications
DSR-1 "Subsonic" - a modified rifle using a cartridge caliber 7.62-mm, having a high-speed subsonic characteristics.
The rifle is equipped with a barrel shortened on the 44, the integrated performance muffler is attached to the receiver.
DSR-1 "Tactical" - a modified tactical rifle, different elongated guides, and having the ability to install accessories.
DSR 50 is a modified rifle for 12.7-mm caliber large-caliber cartridge, differs from “DSR-1” by a hydraulic damper in the rifle butt, and a removable muzzle device, but doesn’t fit to a full muffler.
Key Features:
- Cartridge "8.58x69" Lapua Magnum;
- the weight of the rifle without ammunition and sights 6 kg;
- length 110 cm;
- 8 ammunition of cartridges, in the main and additional store on the 4 cartridge;
- stem length 75 cm;
- range of impact destruction up to 1500 meters.
Additional Information:
DSR-1 sniper rifle was in service:
- German anti-terror group "GSG-9";
- German units of special purpose "KSK";
- American police special forces "SRT";
- Special units of Spain and Luxembourg.
Information