Compact gun Springfield Armory XDs
The shutter-casing, made of forged steel and having a matte anti-reflective coating, in the front part is equipped with a large inclined notch that provides a convenient and easy sending of cartridges to the chamber during loading of the weapon. The handle has a large, deep notch that allows you to stably hold the gun during maneuvering, as well as during high-speed shooting. The new gun fully meets the requirements of modularity. The owner has the ability to customize the dimensions of the handle under his arm. This is possible thanks to three interchangeable elements of the handle, allowing you to adapt the back of it to the hand of the owner. Disconnecting the store is done without changing the “grip” with both the left and right hand.
At the bottom of the front of the Springfield Armory frame are Picatinny guides (Mil-Std-1913 standard), allowing you to mount various types of laser targets and tactical lights on the weapon or an aiming block in which they are combined. Shop Springfield Armory XDs is made of high quality stainless steel and has a large margin of safety. The holes made in the store allow the owner to see how many rounds there are in it. The surfaces of the steel parts of the gun are treated with a wear-resistant, highly durable coating "Melonite".
The trigger mechanism of the gun Springfield Armory XDs - single action, shock type. The spring of the firing pin in it is compressed during the forward movement of the shutter-casing when the cartridge is sent to the chamber. The automatic trigger guard is a lever that blocks the trigger until the shooter starts to squeeze it. The fuse is necessary, first of all, to prevent accidental shots during the fall of the pistol on a hard surface at an angle that would cause the trigger to shift (this is caused by a very short descent stroke).
In addition, the Springfield Armory XDs are equipped with an automatic firing pin guard, blocking the firing pin’s advance until the trigger is fully released. The automatic lever fuse located on the handle blocks the operation of the firing mechanism. You can shoot a gun, if only to cover his grip, squeezing the fuse lever at the same time. If the drummer is in the cocked state, then its rear part protrudes beyond the limits of the casing shutter. Thus, the shooter has the ability to determine the state of the drummer visually or by touch.
Similarly, the owner of the gun can determine whether it is charged, because if there is a cartridge in the chamber, the ejector protrudes beyond the top face of the casing. Thus, it is a pointer to the presence in the chamber of the cartridge. The shot can be made only if the shooter correctly takes the gun and squeezes the trigger. Shop is designed for five rounds. Sights, in which the possibility of introducing amendments horizontally, may have or luminous inserts. In addition, the fly can have a fiber optic rod, which helps to significantly reduce the aiming time. The gun Springfield Armory XDs is simple both in design and in circulation, (due to the lack of a manually operated fuse). For a shot, you just need to clasp the handle and pull the trigger.
The main characteristics of the gun:
Caliber: .45 ACP
Weapon length: 166 mm
Barrel length: 84 mm
Weapon Width: 25,4 mm
Mass without cartridges: 822 g.
Store capacity: 5 cartridges
Information