Armored vehicle for evacuation works - BREM-L "Beglyanka"
The car was created at the Kurganmashzavod, the designers took into account many of the requirements for machines of this type in the design of the BREM-L. It quite optimally combines indicators of booking and mobility. The armored vehicle is capable of performing assigned tasks in any climatic conditions and zones. Operating temperature ± 50 degrees. The structural features of the BREM-L allow it to carry out a wide range of tasks of pulling, self-pulling, towing and evacuating various military equipment to medium tank. The machine is capable of performing evacuation work in any field conditions, as well as afloat. Special equipment of the armored vehicle allows it to carry out any repair work of military equipment and work on the preparation of equipment before evacuation. The electric welding and cutting equipment on board the machine allows for a range of works to free equipment from an emergency and prepare the chassis of damaged equipment before evacuation work. The machine can also carry out lifting work or half-lifting equipment for repair in the field, to carry out emergency replacement of large damaged units and assemblies. The machine is capable of self-repair using its own special equipment. In addition to the crane installation on the BREM-L, there is a cargo area that allows you to transport heavy spare parts and blocks to the damaged machine. The machine can be used for excavation works. For this, it was equipped with a coulter for a bulldozer. A speed of 10 km / h for crossing water barriers is provided by water-jet propulsors. To reflect the waves when crossing water obstacles, the car was equipped with a wave-reflecting shield. The machine can operate in water up to three points and evacuate light class equipment. BREM-L can for a long time be in the water with both running equipment and an engine, and with idle units. The armored vehicle for repair and recovery works was created on the basis of the BMP-3 infantry fighting vehicle. It has unification with this machine and has all the basic characteristics of ergonomics, mobility, survivability and security of the BMP-3. Has a large supply of modernization. All of the above makes it possible for BREM-L “Beglyanka” to be considered the best machine of this class.
Key Features:
- weight 18700 kilogram;
- length 7.6 meter;
- the width of the 3.1 meter;
- height 2.3 meter;
- load capacity 5 / 11 tons;
- land / water platform loading capacity - 1.7 / 0.3 tons;
- cable - 150 meters;
- DU - UTD-29T;
- power characteristics of the remote control 450 hp;
- speed up to 70 km / h;
- power reserve up to 600 kilometers;
- armament - one PKT machine gun of caliber 7.62 mm.
Information