French armored vehicle Higuard class "medium MRAP"
The design and features of the wheeled armored vehicle Higuard
The armored vehicle was developed by the company's designers with its own funds. The chassis of the military Sherpa 10 truck is taken as a basis. The same chassis is used and SAU "CAESAR", which are used in units of the French army. The armored vehicle is provided with a high-positioned steel armored case and a bottom of a V-shaped design. The bottom is designed and manufactured by Centigon based in the United States. Ahead are the driver-mechanic and car commander. In the landing compartment can accommodate up to ten people of the combat unit with their weapons. For the transportation of personnel, the landing compartment is equipped with explosion-proof seats. Standard 2-x wing rear doors are available to enter and exit the armored vehicle. For Qatari internal divisions, an armored vehicle will be equipped for entry-exit ramp with a folding-type power drive. For firing in an armored vehicle, a 12.7 or 7.62 mm machine gun or a 40 mm caliber grenade launcher is installed. The installation site is either an armored small tower or an open-type turret with remote control.
Main characteristics of BMM Higuard:
- weight 20 tons;
- weight of payload 4 tons;
- net volume of 15 cubic meters;
- wheel formula 6х6;
- wheelbase from 4.5 to 5.8 meter;
- length 7 meters;
- the width of the 2.5 meter;
- height 3 meter;
- clearance 490 mm;
- Renault engine MD-7;
- HP 340 power;
- torque 1306 Nm;
- execution of the STANAG 4569 case;
- separate gearbox;
- power steering;
- tires R 20 395 / 85;
- Disc brakes with ABS;
- travel speed up to 90 km / h;
- range to 850 kilometers;
- fuel supply 310 liters;
- ford to 1.2 meters;
- obstacles up to 50 centimeters.
Transportation of wheeled armored vehicles by C-130 and A400M aircraft is possible. Equipped with air conditioning and right-hand drive. Has the ability to cold start (from -32 degrees). Additional security - front electric winch.
Information