High-tech polymer for space, aviation and navy created in Russia

Specialists of RT-Chemcomposite holding created an innovative polymer, which will soon replace foreign-made materials in space, shipbuilding and other industries. The test program for this foam has been successfully completed.

About this agency RIA News the press service of the Rostec state corporation, whose structure includes RT-Chemcomposite, said.

The main advantages of high-tech sheet structural foam, which will go into production under the brand name "Akrimid", is excellent heat resistance and immunity to various chemicals.

Basically, the material will find application in radio electronics, shipbuilding, astronautics, aircraft manufacturing and many other industries.

The developers recommend using it as a light filler in the production of multilayer fiberglass and carbon fiber elements, as well as for the manufacture of the inner lining of ships, boats, spacecraft, hulls of electronic equipment. In addition, it will be used to create fairings for engines and housings. aviation equipment and UAV.

Oleg Yevtushenko, Executive Director of Rostec State Corporation, said that many Russian manufacturers have successfully completed verification tests of the new structural material.

Comments

[Thrifty]

This is good, but it was possible in more detail, in particular, about its combustible properties and toxicity. ..

[Vladimir_2U]

Uh, but this is not a recommendation?

excellent heat resistance

[tol100v]

Quote: Thrifty

but it was possible a little more

Quote: Thrifty

created an innovative polymer that will soon replace foreign-made materials

Here's a simple answer: "import substitution", not an innovative breakthrough in the creation of polymers with desired properties!

[Vasyan1971]

Quote: Thrifty

This is good, but it was possible in more detail, in particular, about its combustible properties and toxicity. ..

Yes. And then this

... excellent heat resistance and immunity to various chemicals.

Malova ...

[SSR]

Quote: Thrifty

This is good, but it was possible in more detail, in particular, about its combustible properties and toxicity. ..

The very word "Arimid" already says a lot, comrade.
If it is based on polyimide, then 450 should hold. Briefly 750, but here it is already necessary to climb into the details, but in strength the Arimide and Aramid threads are five times stronger than steel.

[sharp-lad]

Tensile, compression and shear - depends on the filler.

[Piramidon]

Quote: Thrifty

but it was possible in more detail, in particular, about its combustible properties, about toxicity

The main advantages of high-tech sheet structural foam, which will go into production under the brand name "Akrimid", is excellent heat resistance and immunity to various chemicals.

[businessv]

many Russian manufacturers have successfully completed verification tests of a new structural material.

Well, thank God, they did at least something! And even hope, not even for "breakthrough technologies", but in general at least for something new, began to fade away!

[cniza]

Little information to give an assessment, time will tell ...

[svp67]

Very interesting. Is it suitable for creating wings? Or just for the fuselages?

[Vasyan1971]

Quote: svp67

Is it suitable for creating wings? Or just for the fuselages?

Figs knows. Sheet foam. One side

Developers recommend using it as a light filler.

And on the other -

to create engine fairings, aircraft hulls and UAVs.

Is it suitable for wings?

[Piramidon]

Quote: Vasyan1971

Figs knows. Sheet foam. One side
Developers recommend using it as a light filler.

And on the other -
to create engine fairings, aircraft hulls and UAVs.

Is it suitable for wings?

It is clear that this is not for power elements. Fairings have long been made of cellular plastic, which does not carry a large load ..

[Vasyan1971]

Quote: Piramidon

It is clear that this is not for power elements.

Exactly.

Quote: svp67

Is it suitable for creating wings?

[Piramidon]

Quote: Vasyan1971

Quote: Piramidon

It is clear that this is not for power elements.

Exactly.

Quote: svp67

Is it suitable for creating wings?

The wing carries the main load. So for a solid liner, this is unlikely. It is possible that for a light aircraft it is possible to cast a wing from such a foam

[Piramidon]

I’ve found it yet. They don’t say anything about strength.

reported that sheet structural foam, manufactured under the brand name "Akrimid", has a record heat resistance and is resistant to chemical influences.

The material is used as a lightweight aggregate in the manufacture of multilayer parts made of fiberglass and carbon fiber, the inner lining of spacecraft, aircraft, engine fairings, the hull of small aircraft and unmanned vehicles, etc. The material is also used in the manufacture of composite hulls and deck elements of ships and boats, hull structures of radar equipment, - said in Rostec.

[Blue fox]

If the photo is in an article from the specified production, then obviously you need to throw money for the repair of premises, and the "collective farm" bunches of wires to the "Ketai" LED lamps are clearly unsafe. Well done production workers and bow to them for their work. Innovation is innovation, but the safety of workers and a decent production environment must be ensured.

[Mikhail m]

The issue of material cost is not softly mentioned. Judging by the scope of application is very considerable. And with the introduction of promising developments there are always problems. Somehow, everything through the decaying West basically comes. I hope, of course, for the best, but historical experience inspires doubt.

[petrol cutter]

The cost of materials of this level, I think, in principle, can not be cheap at this stage.
Expanding their production makes it cheaper at times. Remember mobile phones seventeen years ago.

[SSR]

Quote: Petrol cutter

The cost of materials of this level, I think, in principle, can not be cheap at this stage.

For Koreans and Americans, it’s 10 times cheaper than ours, although we have three manufacturers in the country, one in the USA, one in France, but they figure in industrial volumes, and in fact, our share is 100 tons per year. T

[petrol cutter]

All of the above comrades in the light of recent events ...
They can’t easily sell them to us. This is a turn! ... Suddenly, right? ..

[SSR]

Quote: Petrol cutter

All of the above comrades in the light of recent events ...
They can’t easily sell them to us. This is a turn! ... Suddenly, right? ..

80% of our market is Koreans. Even the Americans bought expensive from us for the manufacture of armor for policemen and could not believe that our characteristics are higher. But damn expensive, more expensive in the domestic market, hence the dominance of Koreans, Europeans curled up but it was not critical.

[ximkim]

Quote: businessv

Quote: Giena

I hope Chubais is not there "project manager" ..?

It is very doubtful that this outstanding figure had a hand in it - it usually only gets worse from this!

And more expensive. I, since I looked at the battery from Rusnano, there is such a price (as if made of gold) ..

[Prjanik]

Well, great, such news should become commonplace.

[petrol cutter]

This can not but rejoice on this cold evening.
Especially taking into account today's transfer of the head "Sargan" to the Russian coast guard at AO NW "More".

[Vadim Zhivov]

And you can a little more ... If not difficult ...

[petrol cutter]

It will be considered a flood perhaps ...
And actually, what detailed ... It was cold and windy. The weather is disgusting. The grand transfer was scheduled for 14'00. In fact, by 15.00 we managed with God's help. I personally died like ...
"Raptor" came from Kerch as an accompanying person. Further, a meeting about the state of affairs in the world, and they galloped a couple across the sea, again in the direction of Kerch to guard the bridge.
If a series of question.
Then the second (there I personally applied my crooked handles) is now undergoing sea trials, presumably in a week and it will be transferred. Well, the next in the first workshop, in the fifth span, the team is preparing.
We were removed from this project. And they transferred to "Kometa120M" to study.

[Kerensky]

Little information. Where it will be used is an interesting question. And the properties? Why is this "new foam" better in combination?
It should be advertised, but they modestly mumbled: "... excellent heat resistance and immunity to the effects of various chemical reagents ...".

[Tank jacket]

Please tell me, i.e. we did not like POLYMERS¿? ¿? ¿?
What about nanotubes?
Nanotubes ..........
My nanotubules?

[petrol cutter]

In no case.

[Tank jacket]

Tell us about your purchases ...
About shopping ...
About my little purchases

[petrol cutter]

Products have successfully passed verification tests. No one else will tell you anything. And rightly so. Since it is a state secret.

[Tank jacket]

I will hand over kjoll hrpgtypts fe nezhomtkhplr

[Tank jacket]

Gas cutter, my name is Ruslan, what's your name?

[petrol cutter]

Vitaliy. What does it change?
Today, at the exit of the ship (I would call it a motor boat), our welder Kolya was presented for the filming. I thought the phone would take alert guard.
Who will tell you the truth in the latest edition for such things? ...

[Tank jacket]

Vitaly, welcome will be familiar ...

[GABALIS]

AAAAAA Prosralipolymers !!!!

[Jeremiah]

Rogozin needs to warm the cottage. Well, as a testing ground ... Before releasing into space

[cloud catcher]

Again rebus. Ferrite with a binder polymer?

[Tank jacket]

Quote: Petrol cutter

In no case.

I suspect that there was
In no case.
Hello from mom) Sarah
Connor

[Tank jacket]

Liquid terminator

[Tank jacket]

Yyyyyyuyyyu

[Piramidon]

Quote: Tank jacket

Yyyyyyuyyyu

When will you buy a new clave?

[Tank jacket]

And about polymers, what do you say?
And then there is a parable in the heathens about how .......... Polymers.

[Chigi]

"Buy our elephants" ... Where are the characteristics of the material?
Which organization conducted the examination, where is its report?
Can our company get samples of your Akrimid material for independent testing?

[Eug]

Use for interior cladding - i.e. is it non-combustible?

[gggddddsssccc]

another lie.

[SSR]

Quote from S.S.R.

Quote: Petrol cutter

All of the above comrades in the light of recent events ...
They can’t easily sell them to us. This is a turn! ... Suddenly, right? ..

80% of our market is Koreans. Even the Americans bought expensive from us for the manufacture of armor for policemen and could not believe that our characteristics are higher. But damn expensive, more expensive in the domestic market, hence the dominance of Koreans, Europeans curled up but it was not critical.

The commercial market is for Koreans and the domestic market for VP.