Technodinamika will conduct technical re-equipment of production

Tekhnodinamika holding (included in Rostec) intends to invest about 28 billion rubles. in retooling to 2020 g, reports MIC with reference to the general director of the enterprise Maxim Kuzyuk.

According to the head, “the holding company today has a need for technical re-equipment, and part of the modernization steps have already been completed.”

“We are in our program before 2020, large enough funds must be invested in order to reach a competitive level. Our technical re-equipment program from all sources of financing, not only from the state, plans to attract about 28 billion rubles, ”said Kuzyuk. He explained that “credit financing, return financing, own funds” will be attracted.

Help Rosteha: “Plants and production associations of the holding specialize in the development and production of units, units and systems in the main areas:

• units and engine control systems,
• life support systems and rescue systems,
• control systems and actuators,
• hydraulic systems and fuel systems
• power supply systems and switching equipment,
• auxiliary power units
• service equipment for airports,
• landing gears.

The main customers of the holding are United Aircraft Corporation, Russian Helicopters, Sukhoi, United Engine Corporation and many Russian airlines: Aeroflot, Sibir, UTair, Russia, Transaero. ”

Comments

[ALEA IACTA EST]

Good technique is half the victory.

[Andrey Yuryevich]

Militia "Varyag": Shyrokyne is our springboard for the future

offensive

Adding comments to this article is prohibited

Anyone explain?

[kil 31]

Where will they get new equipment if there is a sanction against us? Which countries? I would like more details, and well done you have to go in the wake of the progress.

[demon1978]

Quote: keel 31

and well done, you have to follow the progress.

We must not follow the trail, but create this "trail" ourselves, let others catch up !!!

[saber]

South Korea produces very decent equipment and did not impose sanctions. Italy stands on its hind legs and licks its lips on our market (although I would prefer Koreans). China is a perfectly normal supplier of certain, mostly secondary, equipment. We are waiting for the delivery of the Russian machine-look at this miracle

[Lt. Air Force stock]

Quote: keel 31

Where will they get new equipment if there is a sanction against us? Which countries? I would like more details, and well done you have to go in the wake of the progress.

In the world, basically three countries are known for producing high-quality machine tools and equipment: Germany, Japan and the USA. Most likely through third countries we will buy India or China.

[Turner38]

For a year, at the factories we have in Kovrov, so much equipment came from supply, Italy, Switzerland, etc., that the people do not have to work for them.

[ramzes1776]

The necessary machine tools and equipment have long been purchased in South Korea and Taiwan. So let your sanctions be thrust into one place.

[Samaritan]

For example, in Perm: http://www.sdelanounas.ru/blogs/63455/
Or: Ural machine-tool plant "GRS Ural"
Or: ESM LLC is the largest Russian manufacturer of high-tech electrochemical machines for precision machining of metal and alloy parts.
ETC

[Dima Čalevo]

what can I say - the next and consistent positive step. thumbs up

[doctor]

Good luck holding the book.

[Consul-t]

With the mind they would only have invested, in which there are great doubts.

[gjv]

Quote: Consul-t

With the mind they would only have invested, in which there are great doubts.

The Tekhnodinamika holding of Rostec state corporation showed at HeliRussia the generator that will be used, inter alia, on promising heavy helicopters. Based on this unit with increased reliability and extended turnaround times, a line of generators for all types of aircraft will be created.
Technodinamika Holding of Rostec State Corporation took part in the VII International Helicopter Industry Exhibition HeliRussia 2015

[gjv]

Quote: Consul-t

With the mind they would only have invested, in which there are great doubts.

The Tekhnodinamika holding of Rostec state corporation showed at HeliRussia the generator that will be used, inter alia, on promising heavy helicopters. Based on this unit with increased reliability and extended turnaround times, a line of generators for all types of aircraft will be created.
Technodinamika Holding of Rostec State Corporation took part in the VII International Helicopter Industry Exhibition HeliRussia 2015

[Zomanus]

This is the correct strategy - "stuffing" the defense industry with new production equipment. That would not slow down in the future with the implementation of more complex tasks.

[VladimS]

On a simple lathe, skillful hands can do a lot of things, but not everything is possible, for modern universal machines.

[gjv]

+, but unfortunately "skillful hands" are leaving, and there are not enough "handy" young people!

[shadow]

We ourselves will do all the equipment and we will not buy anything abroad

[Alexander 3]

Cadres decide everything. It is necessary to educate and educate young people, and this all starts with education and perspective. And then they bred lawyers.

[erseer]

a year and a half ago I visited ONPP TECHNOLOGY.
there, technological upgrading was going at full speed.
A 3D milling cutter that can almost cut a railcar can be cut on a 1: 1 scale, although the old one has undergone a complete upgrade. (very expensive)
Automatic stacker of glass-filled prepregs, the scale is the same, also completely modernized. (Very expensive)
:-) in the warehouse I stood under a set of "Proton" warheads, the one that did not take off afterwards. (I have nothing to do with my mom). well, and many more interesting buns ...
True, the chief designer wrote his phones and soap on the reverse side of the business card of the chief designer of RPO - the enterprise did not have such a trifle as a personal business card. but now, they say the issue has long been resolved :-)

[erseer]

Quote: VladimS

On a simple lathe, skillful hands can do a lot of things, but not everything is possible, for modern universal machines.

On a simple lathe, skillful hands + leftovers will do what no CNC universal can do.