Class 5A ceramic plate for body armor 6B45 "Warrior": reliability test
Reliable protection, along with weapons, is a key point in the course of combat operations. This is especially true of high-intensity conflicts, to which the Russian NWO belongs.
The RF Armed Forces use several types of body armor. The main one is 6B45, which is part of the Ratnik equipment.
The latter is equipped with class 5A "Granit" ceramic armor plates. One of these products, manufactured in St. Petersburg, decided to test the strength of the author of the channel "Soldier of Fortune".
First, a single shot was fired at the armor plate from a machine gun with a 7,62x39 mm cartridge with a steel core. Distance - 10 meters.
Then the product was “shot” in bursts using a 5,45 × 39 mm cartridge. The distance is the same.
Finally, as a control test, a 7,62x39 mm cartridge was fired again at the already fairly “shabby” plate, but in its upper part.
After 6-7 hits on the 5A class ceramic plate, there was not a single through penetration, which indicates the high reliability of such protection.
However, during the experiment, the author mentioned that one of these plates had previously been pierced when it hit the upper part. However, according to him, this was most likely due to a defective product.
In this case, it remains only to hope that such a substandard will not get to the front. After all, the life and health of our military directly depend on this.
Information