The production of MLRS "Tornado" now works in three shifts

The Tornado-G and Tornado-S jet systems are produced by the Motovilikhinskiye Zavody enterprise. In connection with the conduct of a special military operation in Ukraine, the production of these combat vehicles has increased significantly, breaking the record a decade ago.

This message was made by the press service of the state corporation Rostec.

It is reported that even in comparison with last year, the increase in the output of these products was multiple.

Because of this, the production of MLRS "Tornado" is now working in three shifts, which is caused by increased demand from the Russian military for these systems.

The military division of Motovilikha Plants switched to three shifts due to increased production volumes

- said in a statement.

Nothing like this has happened in the last ten years. The management of the enterprise claims that Motovilikhinskiye Zavody fulfills the state defense order in full and on time.

The Tornado systems began to be produced to replace the older Grad and Smerch MLRS, which are in service with the Russian army. There are two modifications of this combat vehicle. "Tornado-G" has a caliber of 122 mm, and "Tornado-S" - 300 mm.

"Motovilikhinskiye Zavody" is considered the oldest operating production in the Urals. They include enterprises specializing in the production of metallurgical and machine-building products.

Comments

[Sergio_7]

Nothing like this has happened in the last ten years. The management of the enterprise claims that Motovilikhinskiye Zavody fulfills the state defense order in full and on time.

Well done, everything for the front, everything for the Victory!

[ZoV]

Quote: Sergio_7

Well done, everything for the front, everything for the Victory!

Well done, of course, but the Army needs UAVs and other quadrocopters and a lot .. Like "Geranium" was launched into mass production

[vik669]

Well, why was he silent before and did not suggest what was needed for the army. Country of Soviets and ... and talkative idiots !!!

[kript471gmail.com]

For now, buy from Iran, and from whom else.

[smart ass]

Only now they were supposed to switch to 8 shifts 3 months ago

[opuonmed]

should be done around the clock! everything to win!

[4ekist]

Motovilikhinskiye Zavody fulfills the state defense order in full and on time.

And so it is necessary in all VPK.

[Piramidon]

Quote: opuonmed

should be done around the clock!

3 shifts of 8 hours this is around the clock

[Igor Zhorov]

Three shifts and there are around the clock, as in the Second World War

[stels_07]

and on drones, everything is as usual?

[Got it]

I think Geraniums are stamped day and night, along the way they are no longer quite Iranian kamikazes, control systems have been finalized, this is already a joint thing. If they are not made by the hundreds day and night, then this is a real trynd of our ability to mobilize at least the efficiency that is available The example of the automotive industry leads to sad thoughts.

[Roma 1977]

The auto industry is just an unloved child. THAT they wanted to marry the Japanese, then they wanted to marry the French - and throw it off their necks.

[Puzoter]

Most likely they were joint initially. And something tells me that they are not the only ones. Compare the assortment of Iranian and Russian drones, the imbalance is completely unnatural, despite the fact that Iran, by and large, does not even have an aviation industry.

[Nickelium]

Where is it stamped? In Dubna? It's like a drone factory.

[Dimcor]

Outsourcing, in Iran, is assembled, but the plant is joint, it's just that Iran has ready-made facilities and specialists.

[Nickelium]

It is unlikely. Rather, in some Ivanteevka or Khotkovo.

[kript471gmail.com]

Simple drums for 1 kg. and reconnaissance drones can be stamped from Chinese designers or in cooperatives, in sheds, in the kitchen. There would be an order and a desire. Look, barmaley in Sirria and Palestine stamp them out of PVC pipes!

[Pulkovo1942]

How is the Orion factory doing? Have you been able to replace the Austrian engine in 7 months?

[Johnson Smithson]

engines are not made quickly, Bayraktars are also imported, from Canada

[SKVichyakow]

Quote from Johnson Smithson

engines are not made quickly, Bayraktars are also imported, from Canada

Isn't it Ukraine? The Canadians, after all, refused to supply them.

[Fisherman]

optics and some other systems from Canada .. Ukraine will not replace.

[Dimcor]

The shock drones of the Turks got up because of the Ukrainian engines, and the bayrakter is a class lower, they have solutions there.

[Munhausen]

Quote from Johnson Smithson

engines are not made quickly

It sounded plausible thirty years ago. What is the problem with downloading a program for calculating these engines and another CAD from torrents? You don't even need to buy them now. The Internet is littered with ready-made schemes. Choose any, tweak it for yourself and release it into a series. Delov for a month.
For twenty years now, amateurs have been collecting working prototypes of gas turbine engines in garages, but in our factories they cannot quickly learn how to make even ordinary two-stroke gasoline engines.

[Johnson Smithson]

It sounded plausible thirty years ago. What is the problem with downloading a program for calculating these engines and another CAD from torrents?

and what was the problem for the Turks to make their own, and not buy in Canada?
or what was the problem for Siemens to make and repair its turbine for SP-1 in Germany, and not send it to Canada for repairs?
engines are not only CAD, they are experience and expertise and this is not developed in 1-2 years

[Puzoter]

The Turks put their engine on bayraktars. And the problem is exclusively in commerce - customers want rotax.

[Puzoter]

And Siemens in Canada is a typical example of neo-colonialism.

[Johnson Smithson]

And the problem is exclusively in commerce - customers want rotax.

So 90% of their customers are Turks themselves) if you do not take Ukraine, then in other countries they take only 5-7 pieces and these are countries like Ethiopia, Niger, Pakistan, etc., there is a list on the wiki. And in total, more than 2 pieces of Bayraktar TB300 were produced, and they are mainly in Turkey.

If the Turks themselves do not want to install a Turkish engine, then there is a reason)

[Munhausen]

What problems did Siemens have with the turbine repair? No one in the world did not undertake to do this? And what were the problems with the development of this turbine and its production? Apparently none, they took and did what we could not do. After all, we cannot develop or repair such engines.
Something more complicated than a moped engine does not require decades of experience and sky-high expertise. An example of this is the huge number of Chinese-made scooter models. And no matter what quality we had, no one can do anything like that until now. We still cannot develop a normal moped-level engine. In principle, masterpieces of sports foreign motorcycles are not available to us. Unable to design and implement.

[sgrabik]

In the wartime regime, which by all indications has already begun, it is necessary to give full priority to military products, to abandon all forces, to mobilize science, industry, the best specialists, in peacetime - we cannot win this war with half our strength, and therefore the sooner we understand this and adjust to a new way of existence of our state, the sooner we will achieve our goals.

[Munhausen]

No matter how much effort and money are thrown into science. And that's what we often do. This industry scales very slowly and it develops not in direct proportion to the severity and loudness of the order to Develop. The average time for the development of a scientific direction is from 10-15 years. That is how much time the atomic project, space, and the education system took.

[Vladimir100]

Quote from Johnson Smithson

engines are not made quickly,

disgrace

[Puzoter]

Listen, the engine for the drone is technology from the 30s! Two pistons, two cylinders, crankshaft, crankcase and gearbox. Are you saying we don't own them? Yes, a couple of workshops, with modern CNC machines, are able to stamp dozens of them. We have been producing Rotax clones under the RMZ brand for decades. Even if they are not as perfect as the most modern rotaxes, it is still above their heads for a drone.

[Johnson Smithson]

I didn’t say that we couldn’t do it, I wrote that it’s not done in 1 year to launch a new production of engines.
To begin with, the engine must be developed and tested, and this is suddenly also done in 1 month.

Making a good internal combustion engine is not a pair of CNC machines, as you say, otherwise AvtoVAZ would not have installed engines from Renault, but they would have made their own no worse.

And aircraft engines are not simpler, but more difficult, that they are not important for a drone.

And now we have global problems with engines, for boats, for ships, for helicopters. A couple of CNC machines cannot solve this, we are far behind.

[Puzoter]

Sorry, but about the "lag" this is complete nonsense. China was once before us as before the moon, but now, consider it the other way around. They stamp any foreign equipment as a blueprint. What's stopping us from doing this? And I assure you: an aircraft engine for a drone is several orders of magnitude simpler than a modern car engine, with all sorts of Euro5 and so on.

[Johnson Smithson]

Sorry, but about the "lag" this is complete nonsense. China was once before us as before the moon, but now, consider it the other way around.

This is not nonsense, these are facts.
And here, what was once? Now we are buying marine engines from China, and not from us. China is investing in the industry with money that we never dreamed of, hundreds of billions of dollars. And in the development of electronics even trillions of dollars.

And to say that right now we will make a blunder on our knees, and in a month we will catch up with at least China, this must be very naive. This will take years.

[Munhausen]

Modern systems for the development and processing of data make it possible to operate with several billion parameters in calculations. Probably worth repeating. The system can handle several billion floating point parameters. This allows for very accurate and versatile process simulations without building full scale prototypes. The Siemens turbine was designed in this way.
There are a lot of various 3D printers on the market, up to those printing with stainless steel. There are precision casting systems. And many of these machines are made in China. What do we end up with? Let's compare any engine from a foreign car and a domestic samopal.
If you understand completely, we have a global problem with engines in any industry and direction. For some time now, even in space engines.

[sgrabik]

It’s just that at the moment an urgent transition is needed from a market economy (although it is a stretch to recognize a fully market Russian economy) to a military, planned economy, where everything is clearly scheduled and determined who, what and in what volumes should produce, and all these intermediaries, firms - gaskets between manufacturers and recipients, must be immediately liquidated, it is also necessary to immediately abandon tenders for the development of weapons, as well as for the purchase and supply of weapons and military and dual-use goods, this is the very first thing that needs to be urgently done.

[kript471gmail.com]

By the way, in Soviet times they made motors for aircraft modellers, which would be just right for one-time papillaces.)))

[Uprun]

Eka is unseen, my father worked at the Chelyabinsk Tractor Plant for 55 years in the 1st workshop ...., he did tank engines, so in the 80s the production worked in 3 shifts .... without CBO, and here it’s almost a labor feat !!! !

[Alexander Salenko]

I am more interested in the question of personnel here, when vocational schools and technical schools were actually destroyed, and those that worked, their graduates did anything, but not direct work in their specialty.
I myself was a worker for a short time, for a long time, and then the next question, I went to the factory as a student, the crown will not fall, for a student I have many years, for 20 thousand or something a month?
[media=https://simferopol.gorodrabot.ru/?cp=AO+%22plant+%22violent%22]
These are pre-tax salaries in my hometown. I spend more than 5 thousand on my son’s rocking chair - this is with a coach, this is a matter of my child’s health, and he is not the only one for me.
And what else I don’t understand is, does the ruling class really want to lose and doesn’t want to share at such a moment? Many of the guys I worked with worked at this plant, they will return if motivated.

[frog]

None of the yelling people will answer such stupid questions, alas .... From yelling loudly in three shifts - yes. Not even talking about subcontractors, without which not a single large-scale production will work.
About s / n - a separate song
And as for “sharing”, they don’t have such a function in their head, there is a function “share” .....

[Puzoter]

Therefore, they were engaged in anything that was not in demand in real production. But vocational schools and technical schools have not gone away, they are now simply called colleges, and there are enough technical specialties there.

[Alexander Salenko]

Share, you don’t tell me about education, it was not in demand. Now, by the way, because of the Unified State Examination, secondary specialized education has become demanded that these vocational schools, call it what you want, are overloaded, and there are really no teachers left, as well as a material and technical base. If there was no work in these specialties, then why get an education? I have a friend, a friend of my wife, a seamstress, but we don't have a garment factory, although we used to have one. And students of the radio-electronic school sell mobile phones in the passages.

[sgrabik]

The time has come to urgently change priorities, we now simply need talented techies, engineers, designers, technologists, etc., of course, professional military men, and we continue to produce lawyers, economists, managers of all stripes in huge numbers, but at the moment they we simply do not need such a large number, times have changed and according to today's real needs, we must change our priorities.

[Xnumx vis]

Quote from uprun

so in the 80s, production worked in 3 shifts .... without SVO, and here it’s almost a labor feat !!!!

In the early 80s, he worked at an instrument-making plant, various necessary production for cruise missiles and nuclear submarines, worked in three shifts, this was normal.

[SKVichyakow]

Quote from uprun

and here is almost a labor feat

Do NOT confuse horseradish with a finger. This is not socialism for you, they don’t do too much.

[Boniface]

It would be nice to increase the "accuracy" and the firing range of shells! And so the "thresher" is what you need!

[NKT]

Hurricane modification - "Hurricane-1M"

[Flooding]

Quote: GELEZNII_KAPUT

But what about "Tornado-U", removed from production ?!

Tornado-U is a truck, not a jet system.

[Cheburek]

"... the efforts of Rostec and the Ministry of Industry and Trade are focused on maintaining the production of weapons and military equipment at the enterprise, which has been in the bankruptcy stage since 2018." - the bankrupt increased something there "many times" apparently from scratch, it sounds like news from the looking glass ...

[Old Doctor]

I have a "Children's Encyclopedia", published in the early 60s of the last century. Volume, on the history of the USSR. Section on the Civil War. A poster with the slogan: "Victory is forged in the workshops, rolls along the rails and ends at the front with a bayonet strike." History - it is, yes! In a spiral!

[Uprun]

That's when VAZ, UAZ and others like them will be transferred to the production of military products, then yes ..., everything for Victory ....! And today, from the Chelyabinsk Tractor Plant, which, having produced tanks in the Second World War, left horns and legs ..... From the word, completely ..... production was plundered, the land was sold out ... Approximately the same situation has become with the Chelyabinsk Tank School .. .., today there is a residential microdistrict .... on the site of the barracks and educational buildings ....

[Yapet100]

The Democrats have done things ... And no one has been punished. They live in clover abroad and die there.

[suhorukofal]

So this is our enemy preparing for war all this time. ChTZ is only the tip of the iceberg, on the territories of the former defense industry plants there are now elite residential complexes, either empty buildings, or private offices, and workshops for the production of dumplings or furniture, all enterprises have been buried to hell. Behind the tank school, the Automobile School went into the next world, there is now either a school of ensigns, or something else. Tvardovsky wrote "The Urals are the supporting edge of the state, its earner and blacksmith." There were times when this region was made a base, so many factories were created, so many industries were built. But they broke it all quickly and easily - capitalism will say, "the Union spent too much money on the military-industrial complex, which is why it fell apart, the girls did not have good tights," modern economists say. A little more and they themselves would wear tights after the girls, and at such a pace they would put them on. And now we are reaping the fruits of our orientation towards "progressive Western values", when industry is ruined, but services and trade are flourishing. I don’t want to be an all-weeder, but it’s sad to look at my hometown, how all its potential was ruined.
Although Russia, its people, more than once emerged from the most difficult, from the most hopeless situations as a victor, it remains to believe in this.

[sgrabik]

And what do you want, the market economy and the consumer society have done their dirty deed, because a full refrigerator and the presence of a large apartment, an expensive car and a summer house are not a guarantee of success and complete happiness, if you live by the law - my hut is on the edge, I don’t know anything, then all this so-called happiness
can end quickly, we all live in the same state and must fully comply with the laws, we must not forget that we have not only rights, but obligations.

[former soldier]

God grant that everything would be normal and there would be plenty of ammunition, and that it would be possible to quickly withdraw and turn around from the positions. And so that the boys take care of their equipment.

[Thrifty]

High-precision projectiles would not interfere with them, so as not to release the entire package for one bunker.

[former soldier]

Quote: Pulkovo1942

How is the Orion factory doing? Have you been able to replace the Austrian engine in 7 months?

To do this, you need to entrust the matter to specialists and give them emergency powers. A "la 41st year.

[Horus]

As I understand it, these systems have guided missiles? Another would be booking a cabin, like Chimeras.

[neworange88]

The missile for Tornado-S has a new homing head that will allow hitting a target at the maximum launch range with a deviation from the aiming point of just a few meters.

In addition, new missiles have been developed for the Tornado-S with an increased target engagement range (up to 200 km), as well as equipped with the GLONASS satellite navigation system. According to the developers, the new homing head will allow the missile to hit the target at the maximum launch range with a deviation from the aiming point of just a few meters. Thanks to the new Tornado-S missiles, it will also be able to be used as a universal tactical missile system. According to the developers, “the new missile for the Tornado is now in a high degree of technical readiness. The ammunition is already being tested."

https://vpk-news.ru/news/35158

Russia has begun mass production of new 300-mm guided missiles for the Tornado-S tactical missile system, capable of successfully hitting targets at a distance of up to 200 km.

https://discover24.ru/2021/11/defence24-rossiyskaya-sistema-tornado-s-gotovitsya-strelyat-na-dalnost-do-200-km/

.A high-precision missile of a new design has been created for the Tornado-G multiple rocket launchers. It has already been tested, put into service and supplied to the troops, sources in the military department told Izvestia.
New ammunition allows you to fire a salvo from one launcher at several targets at once, or to focus the fire of several multiple rocket launchers on one. It is for this purpose that a two-stage scheme is used instead of the traditional one-stage scheme. In addition, the missiles have a detachable warhead, which makes it impossible to intercept them with modern air defense systems. The ammunition allows you to hit targets even in shelters and behind the reverse slopes of heights - this is beyond the power of ordinary Grads.

https://iz.ru/1067114/anton-lavrov-roman-kretcul/dobit-zalpom-v-voiska-postupili-novye-rakety-dlia-tornado-g

[Horus]

The characteristics are impressive, these MLRS can significantly change the course of the current war.

[AndrewMv]

Yes, even if such troops fall, otherwise there is simply no point in fighting with artillery and mowing hail. It's better to hit a target with one rocket than to shoot 40 anywhere. These machines will demolish any fortifications, headquarters, concentrations of troops, infrastructure, columns, anything, as long as there is normal intelligence and timely orders to defeat.

[Al manah]

If there were enough of them, then it would not be necessary to produce them in three shifts, and if they are not enough, then they disappeared somewhere, and if they disappeared during the CBO ... Now let's see how many minuses such a logical chain will pick up, even without being completed.

[Sergey Valov]

The logic chain is completely wrong.
1. There are always few weapons.
2. It may not be from loss, but from a small series.
So minus for the inability to correctly make a chain

[frog]

1. There were a lot of them in the USSR.
2. Series for what? What would it be or to use?
And it is far from always possible to increase output without some upgrade.
I don’t give a damn about arithmetic signs, but sometimes it’s useful to understand the subject ....

[Sergey Valov]

“There was a lot of it in the USSR” - what does the USSR have to do with it? Who has a lot? What is a lot? An attempt to get away from the topic?
"Series for what?" - You seriously do not understand why the products are mass-produced?
“sometimes it’s useful to understand a subject ....” - golden words!

[frog]

You did say

Weapons are always scarce.

In the deceased, it was up to the dog. Some, however, did not have enough, but that's it. AND? At the same time, the Union could quickly expand production, in general, mass production. And now we are doing less BMPshek per month than the union per day.

You can grab not from loss, but from a small series.

What is a series, in your opinion? I already said a little higher that none of the series, through the efforts of the "vertical" - are not even tears. About the increase in output, you can just not worry a little.
It was originally said by a friend

If there were enough of them, then it would not be necessary to produce them in three shifts

That is, without any operations, we produce weapons that are not enough. There is a lot of talk on this topic here.
Then, within the framework of "not leaving the topic", you come, all in white, and start saying that it is always lacking (especially if you don't do it)), and that only you are d'Artagnan in matters of mass production .... Sharman , in a word....

[Sergey Valov]

“We do less than the union in a day” - and how did the Union end up as a result? By the way, to a large extent it is from this. I had the "happiness" to observe this madness with my own eyes.
“without any operations, we produce weapons that are not enough” - I repeat - who is missing? What is missing? How much do you need? And it's just banal - who pays for the banquet?
"that only you are d'Artagnan in matters of serial production" - thanks for the comparison . However, if without irony, then I really understand something about this. And taught and worked ...

[frog]

“We do less than the union in a day” - and how did the Union end up as a result? By the way, to a large extent it is from this. I had the "happiness" to observe this madness with my own eyes.

Let's just say you're not the only lucky one. And I do know something about the dead. But...
You said that there are always few weapons. From this, in fact, it began. there is one nuance (that is, not one, but we are not defending a candidate's thesis?)) A lot or a little - it depends on the task. If you buy a pie, then 5k rubles is a lot, but if you buy a car, then it’s still not enough. And then the question is what kind of weapon and for what. if you have an analogue of the notorious hymers (the stump is clear, missiles for him)) - then, so to speak, you don’t need a lot of them. If you are operating with an uprooted Katyusha, then alas ... And so it is throughout .... And since you are going (since the notorious 2014) to play a little muscle, then get ready for this. And either play "high-precision, unparalleled" in an adult way, not forgetting about coordination, target designation and other nonsense (having previously assessed the reality of this in our conditions)))) or restore the production of art that you ruined. There was time for both solutions. But we have him (as with Yura). Not to mention the fact that there was time to evaluate the experience of the conditional 2014, as well as to draw the appropriate conclusions. But we, traditionally, have some problems with the production of everything except Mriya and cartoons....
To the question

who is missing? What is missing? How much do you need?

Well, the answer to your other question is even simpler. Only a very decent economy can afford to "make profit" in our volumes and with our features. I'm talking about providing muscle, of course. And since we don’t have one, we need to do something with reality. For I was "both taught and worked" and I know something about all these jokes. And where did their limbs grow from - too
In the same way, I know what, in general, is going on in production and development. For this purpose, there is no need for various tolerances. You need to understand your topic and ...... communicate with understanding people. And you can do fine without disclosure.
That is, the question boils down, in essence, to the fact that we broke down the old house, talking a lot about construction and not building a new one at the same time - and here it is winter. As usual - suddenly. We have such a tradition, every year to go to the bath .......

[Anna E]

During my childhood, when meeting a dinosaur was as natural as a dog or a cat, there was a saying "as you fuck, so drive." That's where she comes to mind. For the last eight years, no one even suspected about in ..., NWO (who doubted!) And "suddenly" on you. "The war came, but I did not eat." Now the factories work in three shifts. "Days and nights at open-hearth furnaces ...". Sleep well, good morning, comrades!

[Dmitry Karabanov]

Excellent, Uralians! Everything for the front, everything for victory!

[opuonmed]

many Shas factories in the Urals military work around the clock!

[RaccoonSnake]

And what about the ammunition for these systems, especially high-precision ones, how are things going?

[jovanni]

I recalled the chronicle of the Great Patriotic War, once seen, when representatives of the workers handed over weapons to the soldiers. Looking into the eyes of the fighter, the old worker said: “Son, fight as it should, defend the Motherland ...” And I think that fighter did not throw his weapon to the enemy, that’s why they won ... It would be nice now, like this, looking into his eyes. ..

[acetophenone]

How to go hunting, so feed the dogs ...

[frog]

So you also need to take dogs somewhere, guides to them ... and there are different dogs

[Buyan]

This is great news, but why without numbers - how many cars, shells are produced? add information, please

[frog]

This is a terrible secret, they say they do it. Like Almaty or there Su-57 or .... or .....

[VicktorVR]

But what about another plant, where rollers for rolling guides were scrapped?
Will there be landings?

[Tagan]

Quote from Anna E.

During my childhood, when meeting a dinosaur was as natural as a dog or a cat, there was a saying "as you fuck, so drive." That's where she comes to mind. For the last eight years, no one even suspected about in ..., NWO (who doubted!) And "suddenly" on you. "The war came, but I did not eat." Now the factories work in three shifts. "Days and nights at open-hearth furnaces ...". Sleep well, good morning, comrades!

This is also natural to this day for many industries, for example, for metallurgical plants, where continuous production is due to its specifics.

[Codett]

The SVO did not teach anything where the cabin armor, as usual, the Ministry of Defense put a bolt on the soldiers.

[Arkady007]

Now it would be even better to establish the production of drones 24/7 in three shifts and Su-25 type aircraft (it’s a pity that they weren’t even in the plans).

[TatarinSSSR]

That is, a shortage because everything that was used before was destroyed by the enemy or worn out and beyond repair? If the US and NATO were at war without nuclear weapons, then such factories would be covered by missile strikes in the first place.

[skkv]

And you have to work in four shifts, not three.

[lets-true]

so then in three shifts - the most difficult schedule for hard workers. Goodbye youth is called. 4 teams, 3 shifts of 8 hours. And so 4 days then a day off. The heaviest naturally nocturnal. You are almost always at work.

[skkv]

No, the hardest one is just in four shifts. Round the clock for 12 hours, the shift is rented "on the go". I worked like this myself.

[Fizik13]

Keep it up! We need all kinds of shells and different ones, but more, more.
There should be a rotation - junk from the warehouses, but you can’t forget about the front for the new ones.

[vadivm59]

but to charge them with what? We need tens of thousands of RSs. We had a plant in the city for the production of these RSs. but it was closed during perestroika. They were made by the thousands a year. It is clear that there was more than one plant, but it’s a pity, such production was powerful.

[ASM]

Do I understand correctly that attacks on squares are being prepared? Those. when Russia is liberated, will the raguli in the west be swept away? If so, then the hammer is a worker with a victorious edge.

[Vasyan1971]

"Motovilikhinskiye Zavody" is considered the oldest operating production in the Urals.

Once again, let's push off from the Urals.

[AndrewMv]

Just in the last month, the first good news. But I would like to know the order of the numbers, at least approximate, because without them the news looks like manipulation. For example, there were only 22 tornadoes in the army in 2022. If I'm not mistaken, they were adopted in 2017. i.e. in 5 years, 22 pieces were produced and this turns out to be 4 pieces per year. I would still like to understand what kind of records are being beaten there? Instead of 4 pieces, they began to produce 6, or nevertheless they took up their minds and every month they produce dozens of these critically needed machines for the front.

[SlavaS]

A beautiful building in the photo, not like the current birdhouses

[Slavan73]

I work at Motovilikha in this production, and we don’t have any three shifts at the moment, and there are no records, how colorful it is here, the lie comes from the plant’s management, like how everything is super here and we work in three shifts, but the time will come and they will ask where the products are. Recently, yes, delegations came and it is planned to increase production, but at what capacities, they simply do not exist until the swing and the year will pass.

[lelik613]

For cars, engine and cab protection is needed, albeit from boiler iron. Simple welded.

[Yuriy77]

And Hurricanes, apparently, are no longer made?

[Augustine]

The fact that MLRS is produced is good, but the issue is the production of shells! Can the industry ensure the production of declining stocks, otherwise, taking into account the problems of the Armed Forces that have proven themselves, then these Tornades will be under the fence

[Hitriy Zhuk]

And all the same, why not tie the launcher from the RZSO under the helicopter?
With their "cabrising" NURSs they play precisely in the RZSO.

[Arbeiternegast]

Quote from Johnson Smithson

I didn’t say that we couldn’t do it, I wrote that it’s not done in 1 year to launch a new production of engines.
To begin with, the engine must be developed and tested, and this is suddenly also done in 1 month.

Making a good internal combustion engine is not a pair of CNC machines, as you say, otherwise AvtoVAZ would not have installed engines from Renault, but they would have made their own no worse.

And aircraft engines are not simpler, but more difficult, that they are not important for a drone.

And now we have global problems with engines, for boats, for ships, for helicopters. A couple of CNC machines cannot solve this, we are far behind.

It is clear that they are lagging behind. But after all, you can put an overloaded, forced internal combustion engine on a drone, with a small work resource, if for a kamikaze don. For one flight, there is no special technology needed there, I think so.

[S. Viktorovich]

All these are meaningless pieces of iron without modern communication, reconnaissance and guidance systems. The plant is loaded, but what's the point?