Military Review

Texas do-it-yourself land mine

7
Matt with the “Destructive Ranch” is testing a “mine” designed by him from an old rifle barrel, a pair of pieces of iron, a cross screwdriver and a welding machine.

7 comments
Ad

Subscribe to our Telegram channel, regularly additional information about the special operation in Ukraine, a large amount of information, videos, something that does not fall on the site: https://t.me/topwar_official

Information
Dear reader, to leave comments on the publication, you must sign in.
  1. Tolstoevsky
    Tolstoevsky April 9 2017 11: 50
    +1
    actually this is a study guide on terrorism
    1. Denimax
      Denimax April 9 2017 22: 29
      0
      The terrorist will not do such crap.
  2. Vladimirets
    Vladimirets April 9 2017 12: 14
    0
    On VO, one of the admins is obviously a fan of Matt. winked
  3. The Sparkle
    The Sparkle April 9 2017 14: 24
    0
    So, as far as I know, this is an invention of the Vietnamese partisans.
  4. Taoist
    Taoist April 9 2017 18: 06
    0
    Anti-personnel from pistol cartridges did so ... 9mm in the foot ... that's it.
    1. PSih2097
      PSih2097 April 9 2017 18: 54
      0
      Quote: Taoist
      Anti-personnel from pistol cartridges did so ... 9mm in the foot ... that's it.

      Not only...


      Well, and finally:

      PMP device

      The base of the mine is a pistol barrel without rifling (1) with a cartridge (2) placed in it. The cartridge is fixed in the barrel rigidly, and any reloading and replacement of the cartridge by the design of the mine is not provided. In the upper part of the barrel there is an annular recess (3) for two retaining balls. A sleeve (4) is put on the barrel, having holes for balls in the body, and four slots in the upper part. A sleeve (5) with an annular groove in the middle (6) is inserted into these slots. This sleeve holds the balls in place, providing a tight connection with the sleeve and barrel. Thus, the barrel and the coupling through the sleeve are connected by balls into a single whole. The sleeve is prevented from shifting downward by a spring (7), which rests against the ring (8) on the barrel protrusion with the second end. And finally, all this is inserted into a metal tubular body (9), having in its lower part a striker (10), rigidly fixed to the bottom of the body. For simplicity, we do not show threads on the diagram. The top of the sleeve is closed with a rubber cap (11) and a rubber gasket (12).
  5. Nikola3
    Nikola3 April 10 2017 04: 18
    0
    Who gave these clowns a weapon in their hands, did they hear anything about safety?