Military Review

Army knife ON-40

An important element of a soldier's equipment is a knife. This tool, depending on the situation, can be used for domestic purposes or used as weapons. Also, some blades were originally developed in the form of bayonet knives, differing in a fairly wide range of tasks. In the Soviet armed forces, the army knife of the statutory model appeared in the early forties. The first product of this class was the knife ON-40, also known under the designation HP-40.

Before 1940, a specific situation with cold weapons was observed in the Red Army: samples of different classes and types were simultaneously used. At the same time the main blade of the soldier was the standard needle bayonet of the Mosin rifle. Some units were armed with knives of various types, primarily based on the design of the so-called. Finnish knife. For some reasons, later on it was decided to create a universal blade suitable for use for various purposes and by different departments.

Army knife ON-40
General view of the knife ON-40. Figure Wikimedia Commons

According to reports, the start of work on creating a new knife in the 1940 year was given for two reasons. First, the military studied the experience of the Soviet-Finnish war, which showed the imperfection of existing samples. The second reason was the plans to re-equip the army with the use of submachine guns that did not have a regular bayonet. Thus, the emergence of a new army knife made it possible to get rid of the identified shortcomings, as well as give riflemen machine gunners an auxiliary melee weapon.

The result of the subsequent research and design work was a new draft cold weapons. The knife of an improved design quickly passed all the checks, after which it was put into service. The product received the official name of ON-40 - “Army Knife arr. 1940 of the Year. It was assumed that these weapons will be the first to receive reconnaissance units and parts of the shooters, armed with submachine guns. Because of this, the letters "ON" are often decoded as "the knife of a machine gun". In addition, there is and is widely known the designation of the knife HP-40 - "knife scout". All variants of names and transcripts are definitely popular, but, as follows from the available data, the official new product was called “Army Knife”.

In foreign materials on the knife ON-40 sometimes there is an incorrect designation, which was the consequence of a curious error. In 1980, the book of the British historian Frederick J. Stephens, “Fighting Knives: An Illustrated Guide to Fighting Knives and Military Survival Weapons of the World”, was published on the combat knives of the world. Having no exact information, the author of the book suggested that the abbreviation “ZIK” (Zlatoust Tool Works) means “Zlatoust Industries, Caucases”. Because of this, ON-40 was named "Armenian knife." In the future, the error was identified, and story about the "Armenian military knife" passed into the category of amusing curiosities.

The blade with the sheath of the original design. Photo

The characteristic features of the NA-40 knife, namely the design of the blade and the cross, clearly indicated the use of some existing developments. It is believed that when creating a promising design, Soviet experts took into account their own and foreign experience, and also borrowed some ideas from existing projects. For this reason, ON-40 contains the features of the “Finca” in its Russian version, as well as the “Partypuukco” scout knife and the regular uniform bayonet-knife arr. 1919 Finnish development. Nevertheless, the Soviet knife did not become a direct development of any concrete existing model, since it absorbed the individual features of several structures at once.

Already in 1940, the documentation for the new knife was received by the Trud plant (Vacha village, Nizhny Novgorod region) and the Zlatoust tool factory-combine (Zlatoust, Chelyabinsk region). Until the end of the year, both enterprises managed to release a certain number of knives, which were soon transferred to the customer in the person of the People's Commissariat of Defense and distributed among the army units.

Trud and the Zlatoust Toolmaking Complex until the very end of the Great Patriotic War remained the main producers of ON-40 knives. However, the production capacity of these enterprises was limited, which is why in 1942, it was decided to increase the production of knives by attracting new organizations. Documentation of the knife was transferred to numerous enterprises of industrial and consumer cooperation, as well as troop workshops. The first order for such a weapon appeared in January 42-th. As a result, in addition to the original ON-40, there was a significant number of similar knives in circulation, differing in certain features.

Knife with a different version of the sheath, equipped with a strap for the handle. Photo

In the basic configuration, the 1940 army knife looked like this. The total length of the product was 263 mm, of which 152 accounted for the blade. Mass without scabbard - 150 g. From the point of view of the general architecture, the knife did not differ from other systems of its class, however, it had some characteristic features that made it possible to recognize it immediately among other knives of its own or another time.

ON-40 / ON-40 received a blade with a length of 152 mm and a width of 22 mm. The greatest thickness of the blade at the butt was 2,6 mm. In the manufacture of the blade used steel grade U7. Used blade with bevel butt (so-called pike) and one-sided sharpening. Under normal hold, the blade was pointing down. Behind the blade there was a small heel without sharpening. The connection of the blade with the handle was made using an elongated shank. Used vsadnaya through mounting method.

The knife was equipped with a wooden handle of complex shape. In its central part, closer to the cross, there was a thickening, behind which there was a section with a gradually decreasing section. This form of the handle allows you to improve the grip without using a notch. The handle in the original version did not have a top used for reliable connection with the blade. The wooden handle was covered with varnish, mostly black.

ON-40 in a sheath with a strap. Photo

Recognizable feature "Army Knife arr. 1940 g. ”Became a curved cross, which ensures the safety of the handling of weapons in battle. To protect the user's fingers, the knife received a curved S-shaped cross. At the same time, its upper part, located on the butt side, was bent in the direction of the handle, and the lower part, towards the blade. This form of the cross was due to the peculiarities of the use of a knife. For strikes from below, the knife was proposed to be held with a straight grip and a blade upwards, for strikes from above - with a reverse grip. In both cases, the nonstandardly curved protection turned out to be more convenient than the traditional design. At the same time, the upper protrusion of the cross can make it difficult to perform some operations with the usual grip.

Corresponding sheaths have been developed for transportation on the 40. This device had a wooden case, and was also equipped with a metal device and a tip. All parts of the scabbard were painted with black lacquer, which prevented damage to the wooden case, and also gave some disguise. As part of the device scabbard there was a leather loop for suspension on a belt. In the design of the scabbard, measures were taken to eliminate noise when removing the blade. It was recommended to carry the knife on the left side with a slight inclination, turning the handle to the right.

Knives ON-40 / НР-40 or similar products were made not only in Vache and Zlatoust. Having other production facilities and different access to resources, other manufacturers of knives did not always comply with the original specification. As a result, a large number of various “modifications” of the original knife appeared, differing from each other in different features. Moreover, serious differences could have even knives of different lots, issued by one gang.

Knife with the stigma of the Zlatoust tool factory. Photo

"Non-standard" knives could differ in the design of various parts. So, there are a number of samples with valleys on the blade, with a nonstandard bend of the cross, with other forms of the handle, etc. Also observed discrepancies in the design of the scabbard. All-metal constructions could be used. The device could receive not only a loop for a suspension, but also an additional strap for holding the knife by the handle and the crosspiece.

The serial production of new knives was launched in 1940 at two plants. The limited capabilities of these enterprises, combined with the growing needs of the army, led to the deployment of blade production by a multitude of other organizations. Nevertheless, even in such a situation, the plants retained their leadership in terms of the quantity and quality of their products. So, only in 1942-43, the Zlatoust tool factory produced almost 650 thousand NA-40 knives, which can be distinguished by the triangle stamp with the letters "ZIK". Of these, 388 thousand army received in 1943 year. However, it should be noted that the pace of release was still insufficient. Only in 43-th customer planned to get more than 1,3 million knives.

According to reports, the knives of artel production could be of low quality. Not having access to the required resources, or receiving a limited amount of the necessary steel, small manufacturers were forced to look for an alternative, which was not always suitable for solving the tasks set. Because of this, some Red Army soldiers got poor-quality knives, which quickly got blunt or even bent under load. Straightening the blade with improvised means did not improve its characteristics either. However, such problems, although present in a certain amount, were not a frequent occurrence. The industry basically had enough resources to produce quality knives.

The product of the factory "Trud". Photo

One of the batches of knives made in Zlatoust in 1943 was widely known. During the preparation of weapons and equipment for the Ural Guards Volunteer Corps, conducted on voluntary contributions and with the help of over-the-schedule work, the Zlatoust tool plant-factory produced more 3300 knives with NA-40 in non-standard configuration. These products received an ordinary blade, but were completed with handles and scabs from ebonite. According to available data, in addition to the materials, knives for the volunteer corps were no different from other products for the army.

Non-standard equipment weapons led to the nickname "black knife". In addition, new items were noticed by German troops, which led to interesting consequences. Already during the Battle of Kursk, stories began to appear about the unique characteristics of the new Soviet weapons, as well as legends about the magical powers that it uses. It is hardly necessary to clarify that the real “magic” that influenced the effectiveness of knives was the high morale of the volunteer fighters.

In some small batches of the company produced premium weapons. It differed from standard knives by a more accurate finish, including the use of non-standard materials. Also premium blades could receive an engraving in the form of patterns or corresponding inscriptions. The scabbard intended for such knives was also distinguished by its solid look.

A note from the book of F.J. Stephens, who became the primary source of information about the "Armenian Knife"

Already in the 1940 year, shortly after the adoption of a new knife for service, the basic techniques of its use in hand-to-hand combat were formed. The pioneer in this direction was V.P. Volkov, who made the appropriate innovations in the Sambo system. The following year, the “Guide to preparing for the hand-to-hand fighting of the Red Army” was published, in which the issue of the use of NA-40 was also considered. In the future, scientific organizations and the Ministry of Defense issued several handbooks on hand-to-hand fighting, considering the use of knives.

The army knife of the NA-40 remained the main model of its class until the very end of the Great Patriotic War. Production of knives in the original configuration continued until the second half of the forties. After that, knives were replaced with products of similar purpose in the form of bayonet knives for the newest small arms. When creating advanced automata, the need to develop a bayonet with a knife-type blade was initially taken into account. As a result, the newest AK machine gun received a full-fledged bayonet, which made it possible to abandon the existing cold arms.

Over the years of operation, the 1940 army knife of the year proved to be from the good side and gained deserved popularity. Moreover, this sample is still of particular interest to both collectors and lovers of cold weapons. Due to the large number of blades produced in the forties, those wishing, under certain conditions, have the opportunity to purchase an original knife ON-40 of this or that version.

Red Army soldiers with knives ON-40 on a belt. Photo

In addition, seeing the demand for an army knife, many manufacturers of similar products have begun to produce replicas that most closely resemble the design of the original ON-40. At the same time, some measures have been taken that take the product out of the category of cold arms and make it the object of household use. There are several similar models on the market, differing in finishing, furnishing, etc. At the same time, the basis for all manufactured products is the 1940 design of the year.

When creating a new army knife in 1940, the experience of using existing variants of such weapons was taken into account. With its use it was possible to develop a new design, almost completely devoid of the existing shortcomings. Thanks to this, by the beginning of the Great Patriotic War, the Red Army soldiers were able to get a new blade, suitable for use for various purposes. Like many other auxiliary products, ON-40 / НР-40 made not the most noticeable, but significant contribution to the approach of victory.

Based on:
Stephens FJ Fighting Knives: Illustrated Guide to Fighting Knives and Military Survival Weapons of the World, Arms & Armor Press, London. 1980.

Subscribe to our Telegram channel, regularly additional information about the special operation in Ukraine, a large amount of information, videos, something that does not fall on the site:

Dear reader, to leave comments on the publication, you must sign in.
  1. The comment was deleted.
  2. bionik
    bionik 24 October 2016 07: 13
    All UDTK tankers (10th Guards Tank Ural-Lvov, Order of the October Revolution, Red Banner, Orders of Suvorov and Kutuzov Volunteer Division named after Marshal of the Soviet Union R. Ya. Malinovsky.) From privates to commanders were armed with these knives. The idea of ​​creating the Ural volunteer tank Corps appeared in 1942, during the battles for Stalingrad. At the beginning of 1943, the newspaper Uralsky Rabochiy published an article “Tank corps beyond the plan”: in the article, tank manufacturers promised to deduct part of the salary for equipping the tank corps with weapons and uniforms. And so it happened: everyone, up to buttons, was bought with “working money”.

    An application for service in the Urals Volunteer Tank Corps was filed by 115 thousand people - residents of the Sverdlovsk, Chelyabinsk and Molotov (Perm) regions. In reality, out of this number of volunteers, 9 thousand 660 people were taken to serve in UDTC.

    March 11, 1943 People's Commissar of Defense I.V. Stalin appropriated to the volunteer tank formation the name of the 10th Ural Volunteer Tank Corps. On June 1, 1943, at noon, on the Okulov Square (now the Ural Volunteer Square), wires were sent to the front. However, by the order of the People’s Commissar of Defense dated March 11, 1943, he was given a different name - the 30th Ural Volunteer Tank Corps. During the years of the war, the tank unit became famous, reached Berlin and Prague. 38 UDTK guardsmen became the heroes of the Soviet Union, another 27 soldiers and sergeants became full gentlemen of the Order of Glory of the III degree.
  3. Michael_Zverev
    Michael_Zverev 24 October 2016 08: 02
    Inconvenient guard though. The grip of the blade toward itself is quite specific and has a fairly narrow scope, attacking sentries. Was it worth it to take such an uncomfortable crosspiece design?
    1. 13 warrior
      13 warrior 24 October 2016 10: 39
      Grab a blade to yourself? What is it like? I know the direct and reverse grip. Share your knowledge, please.
      And the NA-40 knife is still a classic ... I have a replica of it, very convenient, however ...
      1. avt
        avt 24 October 2016 10: 52
        Quote: 13 warrior
        Grab a blade to yourself? What is it like?

        laughing Come on . He described it this way with a straight edge, but when the sharpened-cutting edge is up, respectively, the reverse is with the cutting edge away from him. It’s very convenient when hitting from below and from the side, here’s how the garda is wrapped
        Quote: 13 warrior
        And the HP-40 knife is still a classic ...

        Well, as before yes - the Finnish NKVD ", but the version of the NR-43," Cherry ", I personally like it more constructively, although I would have left the guard from the NR-40. Something more ... ominous or something smile
      2. Michael_Zverev
        Michael_Zverev 25 October 2016 04: 33
        This is like this:

        "... the main grips were considered to be straight, inverted with the blade pointing up (for blows from bottom to top to the abdomen and hypochondrium), or reverse (for blows from top to bottom in the neck). In both grips, the knife lies in the hand" inverted "relative the usual traditional position of the knife, therefore, the guard received a corresponding bend ... "
  4. The leader of the Redskins
    The leader of the Redskins 24 October 2016 09: 02
    As for me, everything ingenious is simple. Nothing extra. And you can cut the fat, and "remove" the sentry. I still remember with fear the bayonet-knife from the "Kalash". One of our guys's blade broke after being disarmed on guard. The bayonet knife was not fastened in its scabbard and fell out onto the concrete floor. The rift is opposite the hole for attaching to the wire sheath. Then everyone was afraid of similar incidents.
    1. Großer feldherr
      Großer feldherr 24 October 2016 10: 27
      Our bayonet knives from ak74 broke when throwing them on trees. In this regard, the knife from AKMS will be better)
      1. alexey garbuz
        alexey garbuz 30 October 2016 23: 01
        It should break in cases of stuck in the body of the enemy. Broke and attack further, but without a bayonet. And if it gets stuck, then the fighter disarms automatically.
  5. The comment was deleted.
  6. bionik
    bionik 24 October 2016 10: 45
    For me, this is the most deadly knife and of all existing ordinary kitchen "bread slicer" laughing
    1. antivirus
      antivirus 16 January 2017 20: 38
      the same factories
  7. Sars
    Sars 24 October 2016 11: 04
    All the same, a strange form of guard. I looked at the sites of manufacturers of knives - there are no such offers.
    I think that she received this form either by misunderstanding, or some marshal insisted.
    Pictured is a product of the Trud plant. Photo guard of the correct form.
    1. Tarikxnumx
      Tarikxnumx 24 October 2016 14: 12
      This guard is due to the fact that it was supposed to use a knife in combat conditions with the blade up. The blow was not only piercing, but also tearing up. And in such conditions, the shape of the guard fully justifies itself.
    2. igorspb
      igorspb 24 October 2016 18: 02
      A knife with such a guard is already XO, therefore there are no offers from knife manufacturers ....
    3. beeper
      beeper 26 October 2016 21: 30
      This form of the guard does not catch clothes, when you cut the sentry’s throat from behind wink ...
      In the "improved" HP-43, manufacturers neglected this operational "nuance" to simplify mass production - flat guards are much easier and cheaper to process, both manually and mechanically (given the understandable "stress" with qualified factory personnel). Apparently they took into account the fact that there were few scouts-specialists in "stabbing" among the mass of army owners of the "scout knife"? Although, if desired, the "Vishnevskaya" guard could be bent into the desired configuration.
  8. Caretaker
    Caretaker 24 October 2016 19: 57
    Quote: igorspb
    A knife with such a guard is already XO, therefore there are no offers from knife manufacturers ....

    Depends on the thickness of the blade.
  9. Caretaker
    Caretaker 24 October 2016 20: 03
    Quote: SarS
    Pictured is a product of the Trud plant. Photo guard of the correct form.

    And in the photo from the book of F.J. Stephens?

    It is possible that the guard of the Trud plant shown in the photograph is curved by the user. The bend is somehow uneven.
  10. Caretaker
    Caretaker 24 October 2016 20: 16
    "In the photo" Red Army men with NA-40 knives on their belt. Photo
    Ryabov Kirill ".

    At the private and the officer, the knives in the scabbard are deployed in different ways, judging by the bend of the guard and the subdigital recess. Probably preferred a different grip. The sergeant (the one in the photo on the right) cannot determine the turn of the knife.

    An interesting article, we look forward to continuing. I would like to read about other types of chemical weapons used in the Red Army.
  11. semuel
    semuel 25 October 2016 13: 02
    I have been living in Vache for two years already. The Trud plant still exists, it produces axes, cleavers and other garden tools. It is being destroyed slowly, people run away, they don’t pay wages. And before it was famous for expensive cutlery, the Chinese rested, and now The shop at the factory has mainly Chinese products. It is painful to look at this, but there are countless such factories throughout the country. A forty-minute drive from Vachi is the city of Vorsma, replicas of army knives are made there from different grades of steel and with any handle material, in general for any thickness of the wallet. Eyes run up, horseradish catch up.
    1. Captain45
      Captain45 26 October 2016 13: 42
      Forty minutes away from Vachi, there is the city of Vorsma, where they make replicas of army knives from different steel grades and with any material of the handle, in general, to any thickness of the wallet..
      I myself ordered a Finnish NKVD and HP in Vorsma on the Russdamask website, I have been using it for the fifth year already. Normal knives. Finnish knives generally have a handle in size, as they did under my arm, and HP has a birch bark handle, very convenient for fishing. Now it's true the prices are already less than 6-7 thousand, I took another 3200.
      1. Michael HORNET
        Michael HORNET 29 October 2016 19: 46
        Made a simple maximum lightweight knife, well, very thin)
        Without chopping function, completely. The main purpose is hozbyt. Therefore, delights with a guard are interesting, but impractical
        The question is whether a modern 6X9 bayonet knife is needed or is it easier and cheaper to finally disconnect the knife from the machine and return to the HP-40 concept at a new level (thermoplastic elastomer handle, plastic sheath, can add thicknesses up to 3 mm)
  12. zoknyay82
    zoknyay82 30 October 2016 14: 21
    The guard is saber, for a knife, for my taste it is extremely inconvenient. The same, pukko without any guards at all or with a bottom plate, which adds versatility. The knife should be convenient in daily (camp) use, in principle, people's lives are carried to a greater extent by kitchen knives.
  13. antivirus
    antivirus 16 January 2017 20: 34
    650 thousand knives NA-40, which can be distinguished by the stigma in the form of a triangle with the letters "ZiK". Of these, 388 thousand army received in 1943.
    50% of growth was given by women and children. And they probably worked in the forge. just kneel down before them.